Pa国际

PA国际厅(中国区)官方网站-PlayAce
CN

NPRC-C71D

电阻变送器,,,,,,,,输入热电阻信号,,,,,,,,经隔离转换为1:1电阻信号和1路4~20mA电流信号输出(其他输出信号类型产品,,,,,,,,详细型号见型谱)。。。 。。。该产品需要自力供电,,,,,,,,输入、输出和电源三端隔离,,,,,,,,具有在线故障自诊断功效,,,,,,,,可以通过PC端或手持编程器对热电阻类型、输入量程等举行组态设置。。。 。。。

Input signal

Output signal

Channels

Power Supply Mode

Share
NPRC-C71D

Core technology

隔离C.png.jpg


【Installation and disposal】



C系列注塑外壳装置.gifC系列注塑外壳拆卸.gif

                                    

Installation                                               Disposal  




Supply
供电电源 18 ~ 60 V DC
Input
输入信号 Pt100、Cu100、Cu50、BA1、BA2等热电阻
引线电阻 ≤ 20 Ω/线
Output
输出信号 输出1:1 : 1 ;;; ;;;输出2:4 ~ 20 mA
激励电流 0.1 ~ 10 mA
允许负载 RL ≤ 550 Ω
Transfer characterisics
传输精度 输出1:激励电流0.5 ~ 10 mA,,,,,,,,精度±0.1 %F.S或< 0.2 Ω (取最大值) ;;; ;;;电阻传输精度随激励电流减小而下降 输出2:0.1 %F.S
温度漂移 30 ppm/℃
General parameters
响应时间 ≤ 500 ms
事情功耗 1 W
EMC data
电磁兼容 IEC 61326-3-1
介电强度 ≥ 1500 V AC (输入/输出/电源之间)
绝缘电阻 ≥ 100 MΩ (输入/输出/电源之间)
Operating conditions
事情温度 -20 ℃ ~ +60 ℃
贮存温度 -40 ℃ ~ +80 ℃
State
输出状态 在用户不特殊指明的情形下,,,,,,,,无论输入信号泛起何种故障状态(断线除外,,,,,,,,断线输出1约16 Ω,,,,,,,,输出2为0 V/mA),,,,,,,,在满量程规模内输出均追随输入信号转变,,,,,,,,输出1最大不凌驾430 Ω,,,,,,,,输出2最大不凌驾输出量程上限的110% (如输出2为0 ~ 20 mA输出时,,,,,,,,最小输出可为0 mA,,,,,,,,最大不凌驾22 mA)
Mechanical specifications
毗连方法 螺钉毗连
规格尺寸 宽17.8 mm×高110 mm×深117 mm
装置方法 DIN35 mm导轨装置
Certified data
产品认证 CE, FCC
PA国际厅(中国区)官方网站-PlayAce
NPPB-DIN Bus rail power supply
35mm standard rail
PA国际厅(中国区)官方网站-PlayAce
NPPB-BS210 I/O terminal base
Connect the rail BUS base, external power is introduced through the terminal block of the base. If a redundant power module is selected, this terminal can be left unselected.
PA国际厅(中国区)官方网站-PlayAce
NPPB-BSC028 Dust cover
Protect the exposed bus and split the combination as needed.
PA国际厅(中国区)官方网站-PlayAce
NPPB-SS5 Limiter
For fixed position, standard 2 sets
PA国际厅(中国区)官方网站-PlayAce
NPPB-TS35B Fixed piece
Material: metal iron, used for rail load-bearing reinforcement, standard 2 pieces
PA国际厅(中国区)官方网站-PlayAce
NPEXA-C11

一入一出

热电偶输入清静栅

【网站地图】【sitemap】